Telephone :+86 157 6285 8378
WhatsApp :+86 157 6285 8378
Email :info@ziboyalong.com
Sphere 0.2-2.8mm Bearing Steel Grit For Peening, Descaling, Polishing, Cleaning
We have our own in-house quality control system. Chemical component analysis, Hardness testing, Density Testing, Fatigue life testing all available. We are serious and strict for the quality control of our abrasives.
Also we have good cooperation with SGS Qingdao branch, more testing available if you need, such as Abrasive Conductivity Testing.
Sphere 0.2-2.8mm Bearing Steel Grit For Peening, Descaling, Polishing, Cleaning Specifications :
| Price | Contact Us |
| Place of Origin | Shandong, China |
| Payment Terms | T/T, L/C, Western Union, etc. |
| Delivery Detail | 10-25 Working Days. |
| Keyword | Steel Angular Grit |
Sphere 0.2-2.8mm Bearing Steel Grit For Peening, Descaling, Polishing, Cleaning Detail Introduction :
Bearing Steel Grit
G10/G12/G14/G16/G18/G25/G40/G50/G80/G120
GH GL GP grade
Bearing Steel Grit, it’s much different with cast steel grit, it’s cracked from Ball Bearing scraps with heat treatments. This kind of steel grit has no cambered surface, efficiency higher than common cast steel grit for stone cutting. And also this bearing steel grit contain Chrome 0.6-1.6%, much more wear resisting during stone cutting!
Specification:
Product | BEARING STEEL GRIT GH/GL/GP10-120 | |
Chemical Composition | C | 0.80-1.20 |
Mn | 0.20-1.20 | |
Si | 0.15-1.20 | |
S | ≤0.05 | |
Cr | 0.60-1.60 | |
P | ≤0.05 | |
Hardness ( HRC ) | 60-66(GH) 50-60(GL) 40-50(GP) | |
Density (g/cm3) | 7.4 | |
Durability | 2000-2800 times | |
Metallographic Structure | Fine and Homogeneous Tempered Troosite | |
C Level | <2 | |
Related Articles
-
The Ultimate Guide to Faqs: S170 Steel Shot
S170 steel shot, also known as high-speed steel (HSS), is a low-carbon wrought alloy that contains chromium and tungsten.
-
Metal Abrasives - S170 Steel Shot Size
Cast steel shot is produced in a wide variety of sizes depending on the application. These sizes affect the amount of coverage, saturation, and work-hardening of the surface. Typically, the size of cast steel shot is specified by its specification as a range from S70 to S1320. Although nominal shot
-
The Best Way To Clean Copper: Copper Cut Wire Shot
Copper cut wire shot is a type of cleaning product that is used to remove stubborn dirt and oils from copper surfaces.
-
What Is Steel Shot? How it Can Help You to Reach Your Goals
Steel Shot is a type of ammunition that is made of steel pellets that are shot out of a gun. Steel Shot is designed to hit targets more accurately and faster than other types of ammunition.
-
Guide to G14 Steel Grit
G14 steel grit is a high-quality steel abrasive. It is usually made from a high-carbon steel. It is an excellent choice for general abrasive applications. Unlike other steel abrasives, G14 steel grit is highly resistant to damage.
-
Guide to Steel Shot S550
Steel Shot S550 is used in manufacturing industries to clean steel and iron castings. This product is also helpful in cleaning the inner and outer surfaces of steel castings. It is available in a variety of sizes to suit the needs of different applications. Here, we'll discuss some important aspects
-
Guide to S110 steel shot
S110 steel shot is a high-tensile steel that is made from an ERVIN thermal treatment process. Its grain size is about 170 micrometres. It has a lower hardness than aluminum oxide, resulting in a softer shot with a higher tensile strength.
-
Guide to S390 Steel Shot
Cast steel shot is a high-stress, wear-resistant metal. It is used in shot peening. A small jaw crusher is used to test its wear resistance. The moving plate is made of low-carbon steel, while the fixed plate is made of S390 steel shot. Read on to learn more about this steel shot.
-
Using Steel Grit in a Variety of Applications
Steel abrasives consist of small particles of steel that act as abrasive media. These particles can be spherical or angular. Steel shot, for example, is a common abrasive and comes in a variety of sizes and hardnesses. On the other hand, steel grit g16 is angular and has a harder surface than steel
