Zinc Cut Wire Shots
Zinc shot is made with the process of drawing, cutting and conditioning etc.. And they are used for deburing and cleaning on various Aluminum alloy, Zinc die castings. Because their specific gravity is close to steel and the hardness is low, the deburing can be performed without wearing the products' surfaces.
Zinc Cut Wire Shots Specifications :
|Place of Origin||Shandong, China|
|Payment Terms||T/T, L/C, Western Union, etc.|
|Delivery Detail||10-25 Working Days.|
Zinc Cut Wire Shots Detail Introduction :
Zinc cut wire shot - As Cut or Conditioned
Zinc shot is made with the process of drawing, cutting and conditioning etc.. And they are used for deburing and cleaning on various Aluminum alloy, Zinc die castings. Because their specific gravity is close to steel and the hardness is low, the deburing can be performed without wearing the products' surfaces. Otherwise distinguished from Aluminum abrasive, the security is nice for much lower kinding point of the dust. And they are also characterized at obvious whitening on the surfaces of the work pieces.
Chemical composition of zinc shot
|Product||Grade||Chemical composition (%)||Density||Hardness|
|Zinc cut wire shot - G3 Conditioned||0#Zn||99.99%||0.004%||0.003%||0.001%||0.003%||7.1g/cm³|| |
|Zinc cut wire shot - As Cut||0#Zn||99.99%||0.004%||0.003%||0.001%||0.003%||35-55HV|
0.6, 0.8, 1.0, 1.2, 1.5, 1.7, 2.0, 2.3, 2.5, 3.0 mm
Q: Are you a factory?
A: Yes, we are a factory/manufacturer. We established the steel abrasives factory since 2007.
Q: What is your products range?
A: Our main products are High Carbon Steel Shot, High Carbon Steel Grit, Carbon Steel Cut Wire Shot, Stainless Steel Cut Wire Shot. After years of development, we expanded our products range, Bearing Steel Grit for marble & Granite cutting, Cast Stainless Steel Shot, Zinc Cut Wire Shot, Aluminium Cut Wire Shot, Copper Cut Wire Shot, Garnet Sand, Fused Alumina, Sandblasting Gloves etc. also available!
Q: What's the production capacity of your steel abrasives?
A: The annul output of steel abrasives is more than 30,000 MT.
Q: What's the MOQ for the steel abrasives?
A: Usually 2 MT is the MOQ for steel abrasives.
Q: What's the payment terms?
A: T/T (Bank Transfer) or LC at sight both ok!
Q: What's the package method?
A: a) 25 kgs/bag, 40 bags/big bags;
b) 1000kgs/big bag;
c) 25kgs/bag, 40 bags/pallet;
d) 25kgs/bag, 40 bags/carton box with pallets,
any other requirements pls feel free to contact us.
Q: Can we get your free samples?
A: Yes, usually we offer free samples within 500 grams. If you have any other requirements, pls feel free to let us know.
Q: Can we visit your factory?
A: Yes, we welcome our friends and partners from all over the world! Our factory locate in Zibo City, Shandong Province, China. You can come to Jinan Yaoqiang airport or Zibo railway station. We will arrange car to pick you up to our factory.